Maintenance Optimization

Optimizing existing lines during scheduled maintenance. A critical 220 kV line must be consigned for several months for scheduled maintenance.

Challenges & Pain Points

Disconnecting this line entails large costs due to re-despatch plans.

Our Solution

An adjacent line was equipped with 4 ADR Sense modules and monitored with ADR Operate real-time analysis software. For 3 months, this adjacent line could take in the additional load, namely an average 40% extra capacity.

‍

Ampacimon solution make possible for grid operators to set up maintenance plans that are much more flexible, less constraining, less costly, and quickly underway.

‍

Resources

Learn More about this Use Case

Use cases

Keep Exploring our Use Cases

(SINCE

)

Grid Integration Of Renewables

A large European system operator must connect 9 MW of new wind power on its 63 kV grid.

(SINCE

)

Summer/Winter Load Peak Management

The French Alps sky resort “La Clusaz” is fed by a single 150-kV line. In the winter season, load increases dramatically, while it is very low in summer.

Belgium

(SINCE

)

Securing Electricity Supply

Following the shutdown of Tihange 2 and Doel 3 nuclear power plants, the country faces a major shortage risk and must forcibly increase physical import capacity from neighboring countries (France, the Netherlands).

Challenges & Pain Points

Our Solution

Share this Use Case

Learn More about this Use Case

Keep Exploring our Use Cases

Grid Integration Of Renewables

Summer/Winter Load Peak Management

Securing Electricity Supply